SY-X325
SHUNYI
Availability: | |
---|---|
Model | Specification |
SY-X325 | 1. The chair uses a folding chair frame with a diameter of 25mmx1.5mm circular steel pipe and a diameter of 19mm*1.5mm steel pipe as the supporting beam. The surface is sprayed with high temperature electrostatic spray 2. The chair back PP+GF material is once molded by hot injection molding, good elasticity and strong flexibility. The length of the chair is 460mm, the top and middle of the chair are equipped with 95mm reinforcing bars to effectively increase the strength, the upper end of the back 133*36mm oval hollow handle design, the waist is equipped with 17 4.6mm wide staggered hollow design, grille ventilation treatment and ergonomic top waist, waist protection design. Both sides of the back of the chair are 25mm diameter cylindrical (8mm diameter solid steel bar is embedded at the connection of the tripe) to increase the force and impact resistance of the back. 3. Armrest: new PP+GF material hot injection molding 4. The seat cushion is made of new pressed bending wood board to support the mold foam and high-quality breathable elastic fabic on the surface 4. Two automotive special brake wires are connected between the support beam of the chair frame as a limiting structure (the steel wire is 2.0mm diameter 304 stainless steel, the steel wire adopts the two-end die-cast zinc alloy ring process to ensure the strength of the steel wire and is not easy to fall off) 5. Wheel: The wheel is made of PA+PU materials. The wheel diameter of 50mm is made of PA+ glass fiber injection molding; Wheel hub jacket PU edge, PA parts and PU parts using tooth joint process, made of mutual bite is not easy to fall off; Quiet smooth, can be pushed and pulled in any direction; The screw M11 * 22mm. |
Model | Specification |
SY-X325 | 1. The chair uses a folding chair frame with a diameter of 25mmx1.5mm circular steel pipe and a diameter of 19mm*1.5mm steel pipe as the supporting beam. The surface is sprayed with high temperature electrostatic spray 2. The chair back PP+GF material is once molded by hot injection molding, good elasticity and strong flexibility. The length of the chair is 460mm, the top and middle of the chair are equipped with 95mm reinforcing bars to effectively increase the strength, the upper end of the back 133*36mm oval hollow handle design, the waist is equipped with 17 4.6mm wide staggered hollow design, grille ventilation treatment and ergonomic top waist, waist protection design. Both sides of the back of the chair are 25mm diameter cylindrical (8mm diameter solid steel bar is embedded at the connection of the tripe) to increase the force and impact resistance of the back. 3. Armrest: new PP+GF material hot injection molding 4. The seat cushion is made of new pressed bending wood board to support the mold foam and high-quality breathable elastic fabic on the surface 4. Two automotive special brake wires are connected between the support beam of the chair frame as a limiting structure (the steel wire is 2.0mm diameter 304 stainless steel, the steel wire adopts the two-end die-cast zinc alloy ring process to ensure the strength of the steel wire and is not easy to fall off) 5. Wheel: The wheel is made of PA+PU materials. The wheel diameter of 50mm is made of PA+ glass fiber injection molding; Wheel hub jacket PU edge, PA parts and PU parts using tooth joint process, made of mutual bite is not easy to fall off; Quiet smooth, can be pushed and pulled in any direction; The screw M11 * 22mm. |
Model | Packing Size (mm) | CBM (m³) | N.W. (kg) | Pcs/Ctn | Dimension (mm) |
SY-X325 | 970*580*230 | 0.13 | 2 |
Model | Packing Size (mm) | CBM (m³) | N.W. (kg) | Pcs/Ctn | Dimension (mm) |
SY-X325 | 970*580*230 | 0.13 | 2 |